Thursday, October 6, 2011

How do you change a fuel pump on a 1997 plymouth voyager and where is it located?

lol You're in for some fun.



Pump on this I believe is in the gas tank.

You will need to drop the tank and then pull out the pump.

There will be 2 spots in the back one is the pump the other is the fuel sender unit.

Just make sure you check the rubber gaskets cuz they do go bad.

I did one in a shadow and the thing leak gas real bad.
  • nursing home listings
  • dry hair
  • If u change your fuel pump and it still dont fire what should u check next?

    i have a lincoln ls and i change the fuel pump but its not firing what should i check next
    If u change your fuel pump and it still dont fire what should u check next?
    If you have fuel injection...



    1) DO this ONLY when the engine is COOL !!!....



    There is a valve that looks like the valve on the tires where you put the air in... this is bleeder for the fuel pressure. It is located on the fuel line at the top of the engine, before the line gets to the injectors. Remove the cap and push on the little needle ( as if you were going to let the air out).

    If you see fuel spray out, then you have fuel pressure and the fuel pump/ relay works. Note, if it does not spray, have someone try starting the engine and someone else push on this valve at the same time. If there is still no spray, then you have a fuel pressure problem... Check that you can hear the fuel pump running, check the fuel pump relay, and last...check that the fuel filter is not clogged up. Also check the fuelpump fuse !



    2) IF you DO HAVE PRESSURE, then take the ignition control module out and take it to O'Reily's, Autozone, or Pep Boys. They can check if it is good or not.



    3) if none of these work, Then get a spark plug tester and see if you can see a spark.



    If you see a spark, then you may have a bad CAMSHAFT sensor. If you DON'T see a spark, then you may have a bad CRANKSHAFT sensor. The camshaft sensor tells the fuel injectors when to spray... if this is bad the injectors won't work. The crankshaft sensor tells the sparkplugs to fire, if this is bad, none of the sparkplugs will work.
    If u change your fuel pump and it still dont fire what should u check next?
    A fuel pump is either manual, or electric. A manual fuel pump requires the engine stroke to turn before it can pump fuel. An electric fuel pump starts as soon as it gets power but are switched sometimes, they are not always constant on(such as some vehicles where you switch the power on but not start the car, you can hear the fuel pump prime its-self and then click back off or to standby).



    I am guessing that maybe some relay or fuse is faulty, if this is not the case you will have to probably trace your wiring.



    Possibly there is some logic fault I GUESS COULD HAPPEN, but you could clear that by disconnecting your battery for a minute then reconnect.



    ROBT is also right, if your fuelpump can switch its self if your line is blocked it might sense that it does not need to pump
    A lot depends on the year of the car. You need to give us that info first.
    Check the ignition coil or plug wires.
    spark plugs. or it will help to check all the wiring.

    I just had my car Cleaned up.
    Fuel pump relay or fuse?



    Make certain you are getting spark to the engine also.



    You need three things to get a car started: Fuel, Air and Spark.

    Make sure you have all three. Good Luck
    oh you mean the fuel pump works but the engine wont start.

    if there is no spark at the spark plugs you need to replace the electronic control module located on the distributor.

    I had my fuel pump changed in my E46 and now i smell gas!?

    i have a 2001 E46 and i had my fuel pump changed about two days ago and now i smell gas! what could this be?
    I had my fuel pump changed in my E46 and now i smell gas!?
    Perhaps the repair had been improperly done with the hose from the pump to the engine either being loose and leaking at the pump connection, or the big rubber seal was not replaced and is leaking,

    or the screw cap which holds the pump on top of the tank had not been tightened properly.

    Perhaps also, there is no leak but you are only smelling residual fumes from gas spills made during the repair.

    Either way I would suggest that you bring back the car to whoever did the repair for checkup.

    If you want to check it up yourself, then detach the rear seat, remove the cover/plate at the right side which is secured by 4 pcs. of 10 mm. nuts, then see if there is any leak or vapor leak from any of the points

    previously mentioned. If the leak is severe you may even see gas leaks beneath the car.

    96 Hyundai Elantra where is the fuel pump relay and what does it look like?

    My Elantra just died out going down the road it tries to start but wont. I have changed the fuel filter, fuel pump and screen. I was told it may be the relay for the fuel pump but Im not sure where it is or even what it looks like ... Any help would be appreciated.. Thanxs in advance
    96 Hyundai Elantra where is the fuel pump relay and what does it look like?
    perhaps this will help.......good luck!!!!!!!

    How do i change the fuel pump on a 1987 pontiac firebird formula?

    i thought about cutting out a hole in the trunk to get to it but where
    How do i change the fuel pump on a 1987 pontiac firebird formula?
    You have to cut a hole in the sheet metal large enough to have clearance to remove the fuel lines and lift it out %26amp; then plug the hole without blowing yourself up.

    In the long run it's easier to just drop the tank.

    With an empty tank remove the filler hose connection, loosen %26amp; remove two strap bolts..after supporting the tank. Lower the tank enough to disconnect the fuel lines and electrical connectors..Drop the tank The pump, gage sending unit are inside the tank connceted to the fuel lines. The 'package' is removed by rotating the locking collar and lifting it out of the tank

    If you have help it should take about an hour.
    How do i change the fuel pump on a 1987 pontiac firebird formula?
    It is located in the gas tank. Go by your local auto parts/book store and a buy a repair manual for it. It will be in there on how to change your fuel pump.
    pull the tank and pull it out the fuel pump
    Your trunk is designed for fire prevention and explosion containment. It`s up to you what you want to do as long as you know the risks.

    Yes my truck runs for a while bit then starts back fires and stalls out changed fuel pump but no chang?

    What type of truck? May have something to do with the timing.
    Yes my truck runs for a while bit then starts back fires and stalls out changed fuel pump but no chang?
    Depending on the age of the truck, I would say it's a problem in the timing, possibly a worn distributor shaft or gear......



    On a late model, it's an electrical problem in the computer....
    Yes my truck runs for a while bit then starts back fires and stalls out changed fuel pump but no chang?
    That sounds like a bad O2 sensor. If the ECM/PCM thinks that the engine is running lean or rich, it will add or reduce fuel. What happens is that the fuel mixture gets too rich or lean then won't ignite which causes poor operation and back firing. The engine is operated under preset conditions until warmed up then goes to %26quot;closed loop%26quot; mode where inputs such as the O2 sensor are used to create an output. This will make it run fine until it read the sensors then it will go off on a tangent.
    check the distributor, wiring and plugs. also check for vaccum leaks or a hose that may have come off/disconnected somewhere. also check the fuel filter
    Check timing chain and the timing.
    Start with something simple. Change the fuel filter.
  • drawing a circle
  • ireland
  • Would like to know why my car want start after replacing fuel pump,filter and fuel relay?

    I have a 1987 Buick Lesabre Custom.I replaced the fuel pump,fuel filter,and fuel relay.After I finish installing all the parts I turned the ignition switch and my car started right up.I did this job Sunday October 22,2006.Since then my car has not been able to start up and the battery keeps running down.Can some one tell me why I am not able to start my car or why the battery keeps running down,The car has a full tank of gas?Never did lose any gas from changing out the fuel filter or fuel pump.I have done what the answers that the guys gave me on this site and My father installed all the parts for me on my car he retired as a ASE Master Mechanic 48yrs as a mechanice and in the business.I went back and check the wiring for the fuel pump and it installed correctly and I changed out the fuel relays cause they are 20 yrs old.I have done everything that the guys here suggested that I do and the car still want start.Anymore suggestion?
    Would like to know why my car want start after replacing fuel pump,filter and fuel relay?
    If you checked the wiring and you have voltage to the pump-and its not running -its a bad pump.If it is running-check the pressure relief valve.
    Would like to know why my car want start after replacing fuel pump,filter and fuel relay?
    sounds like air in the system, you need to prime the system, and check all electrical.
    I'd be interested to know why you replased those parts in the first place. Did you have starting problems before?

    I gather the car is cranking but not starting.

    Check the distributor, wires, plugs to make sure everything is connected.
    If you have already re-checked the pump wiring, forget about it being the source of your problem, and start th diagnostics fresh.

    Is the PCM fuse blown?

    is the fuel pump fuse blown?

    While there is still some battery power left (unless it has already gone COMPLETELY dead), retrieve the diagnostic codes from the computer.

    For a discussion of the procedure, along with illustration and a list of definitions, go here------%26gt;



    http://autorepair.about.com/library/ts/o鈥?/a>



    ...and scroll down below the definitions for the procedure.

    If there are codes displayed, follow the proper diagnosis and repair procedures recommended for the circuit, and don't assume that a code for a MAP sensor is NECESSARILY a defective MAP sensor. It COULD very well be a broken vacuum line To the sensor.

    When you turn the key to %26quot;Run%26quot; without starting it, can you hear a %26quot;HUM%26quot; from the tank area? You should be able to hear it for 1 - 2 seconds after the key is turned on, then it will stop unless the engine is running.

    Is there spark from the ignition coil when the engine is cranking?

    If there is the %26quot;HUM%26quot; is there pressure at the test port?

    If there is fuel, but no spark, check for the pulses at the injectors while it is cranking. If there are no pulses, and no spark, (or only one of the two) check for a failed cam/crank sensor at the front of the engine. Very Common failure for this vintage G.M. product.

    As for the battery not holding a charge, the best thing you can do (AFTER finding the cause of not running) is to disconnect the battery and install a test light between the cable and the post. If there is a substantial draw, the light will illuminate. With that connection made, begin to remove the fuses ONE at a TIME and watch the light. When the light changes ( or goes out) that is the circuit you need to address for the cause of draining the battery.

    This should give you plenty to do and give you some direction for the repair. Your dad's expertise will direct the rest of the diagnosis and repair.



    Good Luck
    might be a short to the fuel pump
    check the Alternator