How do I change a fuel pump 2000 hyundai Accent?

oklatom gives very good directions but you can also go to autozone.com and look at the repair manual online for your specific car.
How do I change a fuel pump 2000 hyundai Accent?
Using a proper pump and container, empty the fuel tank of fuel. Now put it up on the lift, place your transmission jack under the tank, and remove the fuel lines using the proper tool, and the straps that hold the tank in place.



Lower it to where you can get a good hold on it, and set it on the ground. Clean around the place where the fuel pump is held in place so as not to get dirt in the tank, then turn it counter clockwise until the hold down comes off. Remove the pump.



Put the new pump in place, put the hold down ring in place and turn it until it seats. Set the tank back on the jack and slide it into place until you can put the straps back on the tank to secure it. Reconnect the fuel line and lower the vehicle. Slide the tank where you drained the fuel to the car, reverse the pump and refill the tank. Test drive, making sure of course that the fuel gage is working as it should.
How do I change a fuel pump 2000 hyundai Accent?
Go to the servicing station
If you have to ask on YA you should be taking it to a qualified mechanic.